112 Pidifin 2K, UsageApplication Concrete, Brand Dr Fixit, Coverage Approximately 06 - 075 m2 kg at 1 mm thickness in 2 coats

Key attributes and perks elastomeric coating that resists water ingress. Strong adhesion to concrete slabs & masonry surfaces. Cftri certified safe intended for water that is safe to drink tanks. Recommended designed for utilization in wet areas. Ensures right dry film thickness. Easy to apply. Description dr. Fixit pidifin 2k is 2 parts polymer, Modified flexible cementitious waterproofing membrane coating specially formulated suitable for concrete and masonry area that is supplied in ready, Mix kits 2 parts . When the dry part is mixed with acrylic, Modified emulsion and applied according the cured, To direction. The utilization can occur as applied on damp surface and excellent waterproofing property, No leakage No more than 10 m. Hydrostatic pressure. Dr. Fixit pidifin 2k will become a tough, Flexible and seamless waterproof membrane and serves as a remarkable water barrier to concrete and masonry surface. Environmentally friendly, Free volatile organic compound voc area of application concrete foundations, Basements wall and lift water tanks, Pits. Swimming pools and reservoirs parking decks, Concealed roofs, Bathroom, Toilet, Kitchen, Balconies and planters. Any other concrete, Cement or masonry surface subject to damage from moisturemethod of application 1. Surface preparationallow new concrete and masonry substrate to fully cure prior application. All surfaces must be free from oil, Grease, Wax, Dirt or additional selections form of foreign matter which might effect adhesion. Spalled concrete must be sound before applied. Substrate should be reach a saturated surface dry ssd condition damp, Without standing water 2. Mixing using portland slowly add, Mechanical mixer powder part to liquid part in a clean container until a seamless and homogenous slurry mixture is achieved. Allow the mixed slurry to stand for 5, 10 minutes for releasing air, Trapped during the mixing ahead of application mixing material must be use within recommend pot life. 3. Applications dr. Fixit pidifin 2k slurry can is appropriate for application via brush. Do not Combine with water for optimal dilution. Recommended total coverage rate is approximately 2 kg. /m2 minimum 2 coat. Allow the slurry to cure for no less than 1 hour before applying a second coat. 4. Curing for maximum protection, Allow 12 to 24 hours curing time after the second coat. Dr. Fixit pidifin 2k requires at least 7 days before swimming pools, Filling spas and water tanks with water along with mock, Up or ponding tests on site to requires at least 7 days before filling spas, Swimming pools and water tanks with water as well as mock, Up or ponding tests on site 5. Cleaning dr. Fixit pidifin 2k can be removed from tools and equipment immediately after use with only hardened, Clean water material can removed mechanically. Drying and curing times are determined under controlled temperatures and relative humidity below 60%, And at average of the dft range for the product. Surface touch dry the state of drying when slight pressure with a finger stays put an imprint or reveal tackiness. Dry to over coat, Minimum the recommended shortest time before the next coat is suitable for use in. Dried/cured for service minimum time before the coating can be permanently exposed to the intended environment/medium precautions & limitations dr. Fixit pidifin 2k is not suitable for traffic area application. Dr. Fixit pidifin 2k is a pre measure package. Do not dilute with water or add any more sand or cement. Dr. Fixit pidifin 2k do not be applied by roller packaging ??? 15 kg/set 2 part powder 10 kg and liquid 5 kg storage 12 month storage in sealed container and room temperature.