UsageApplication Soda maker machine assembly Parts Aerated Soda Water Making Machines, Material Brass

The device is a one man factory for making soda and soft drinks. Approximately 5000 bottles has the potential to be crafted in a shift of 8 hours. It is consisting of the following main components pump This item functions as a three piston pump with a capacity to pump approx. 500 litres per hour. The pump is energized by a hp motor. The pumped water is channeled into the carbonator through a non, Return valve. The fixed pumping speed ensures that the proper quantity of water is fed to the carbonator and in turn the carbonating ratio between water and co2 is maintained. Pressure regulating valve prv the prv ensures that a fixed pressure of co2 is fed into the carbonator. In effect it is the heart belonging to the apparatus and its maintenance and normal functioning is vital to the device along with quality of drink. The prv can be modified for various pressures derived from the soda/soft drink being made. Carbonator the carbonator tank Crafted from high-premium-grade stainless steel and houses a shower and series of ss plates. Gas and water are blended within the tank. The shower and special ss plates inside make certain that the water passing through it is saturated thoroughly thereby ensuring optimum carbonation. Filling head first a crown cork is fixed inside the head. Then a bottle is kept on the bottle table. On lifting of soda flows, A lever into the bottle through a filling valve. To eliminate the air inside a snifting, The bottle valve is provided. Thus when the bottle is being filled, The air is eliminated through the snift valve. Due some amount, To this of soda also flows out through the snift valve. This is unavoidable. When the bottle the lever, Is full is released along with the foot pedal pressed for capping the bottle. The bottle is then removed and the next crown cork and bottle are kept as well as the entirety process is repeated. To make the syrup, Soft drinks concentrate is pre, Filled into the bottle. The bottle is then kept on the machine and soda filled. The force with which the soda flows into the bottle since soda is flowing from a higher pressure inside the carbonator to the atmospheric pressure of the bottle ensures that the previously filled syrup mixes with the soda and the soft drink is ready. This method of making soft drink is called post mix system. Accessories supplied with the machine a detailed catalogue belonging to the device an exploded view of each section of the machine helps in the upkeep and spares parts ordering. A separate section is devoted to the fault finding procedure for each section of the machine wherein are explained the various reasons of a complaint and the methods to tackle such problems. A complete spanner set along with tools and, Special spanners oil can are provided. An extra set of washers features the machine