Brand PPEPL Block Ice Plant, UsageApplication Commercial

Block ice plants available through us are developed by a group of experienced professionals, In tandem with the norms and guidelines already laid down by the industry. Diverse array of offerings plant an electrically consist a, Operated crane brine tank, A thawing tank, A tilting device with an inclined wooden table to receive the ice blocks as they slide beyond the cans and filler. Operational & functional the ice machine & harvesting section of the vegetation is made up of of the an electrically, Brine tank operated lifting device crane running on rails along the edges of the tank, A thawing tank, A tilting device with an inclined wooden table to receive the ice blocks as they slide out of the cans and a filler. Standard rectangular 25, 50 & 150 kg the brine, Ice cans tank is enveloped in solid wooden lids as shown on the picture. The machine room occupies the rear the machine room accommodates the brine chiller with the liquid separator the brine recirculation pump the air or water cooled condenser the refrigerant receiver the electric switch board and other accessories which are associated with one another through refrigerant and brine piping as shown on the piping diagram and the electrical wiring cold pips and vessels are insulated as required. The refrigerant evaporating in the brine chiller cools the brine the cold carrier which is recirculated by the brine pump from the brine tank through the brine chiller and back to the brine tank. The recirculated quantity is sufficient to facilitate adequate agitation in the brine tank. Removal of the process heat takes place in the air or water cooled condenser. Liquid refrigerant collects in the liquid receiver from where it passes over an expansion device back to the brine chiller. The refrigeration capacity required in order to sustain the temperature in the ice storage is small compared to that of the block ice plant, Therefore, To simplify design and minimize service and the ice, Maintenance work storage is cooled with the ice storage is cooled with an air, Cooler refrigerator through brine pumped from the for which, Brine tank a small brine pump is provided. The two main sections of namely the, The plant ice making & harvesting and the machine room & ice storage are placed side by side on the installation site and interconnected by the supply and return lines for the brine and electric power supply for harvesting and lighting. Application cooling food preservation distance transportation fresh keeping for aquatic products ice factory of the ports and docks special areas of cooling advantages capacity modulation and precision cooling high energy efficiency compact ozone, Friendly refrigerants proven technology wide voltage range superior quality wear resistant part steel fabricated acc air cooled condenser, Low vibration, And minimal sound level