Color Black, UsageApplication PAINT Epoxy Coal Tar, Brand Zeochem, Grade Standard Industrial Grade

We stand as the leading manafacturer and exporter epoxy coal tar. Additional specifics it is non porous have good chemical resistant. Resistant to sea water, Tap water, De, Dilute acid hydrochloric sulphuric, Best before fumes, Ionized water Two years from now the mfg date keep in cool and dry place application of coal tar coating as a membrane coating for a. R. Brick/tile lining protective coating of pipe line protection of steel concrete structure chemical factories under side of motor vehicle chasis. Preparation of coating for the purpose of obtain good working consistence the average mixing ratio as under epoxy resin 100 pbw epoxy coal tar 200 pbw surface preparation concrete surface the concrete/cement plastered surface shall be stable in construction free pot holes, Honey combs, From cracks etc. The concrete should be cured as per for minimum of 28 days moisture free along with the top layer shall be dry, Clean even in in line, Slightly rough and level, Maintaining required slope etc., The surface must be remove all, Clean sound dirt, Grease, Curing compounds and other foreign matter by mechanical abrasion for acid etching. Remove water dust from all surface before use mild steel surface mild steel surface are best prepared by sand blasting to clear out all rust or scale. If sand blasting is not possible, Power tool cleaning, Wore brushing or abrading with coarse emery paper may be resorted to. Application after coal tar, Proper mixing should be applied on clean dry surface by wire brush. Coal tar is a self hardening due to chemical reaction which occurs when the epoxy resin epoxy coal tar are mixed together. An initial setting in 3 to 5 hours at 300 deg c final setting occur in 24 to 48 hours at 300 deg c curing time 3, 5 days at 300 deg c. Mechanical physical properties working time@30 deg c 20 minute mixing viscosity@250 deg c 3000 to 6000 mpa specific gravity 1. 15 covering capacity 300, 350 grm/per coat/m2 thickness 100 micron/coat note This item functions as advisable to apply at least two coats to get an adequate film thickness. Equipment cleaning equipment hand should be cleaned before epoxy coal tar begins to set, Soap and water is designed for utilization for cleaning the purpose. Safety at the time of mixing or applying epoxy coal tar, Wear protection goggles and, Hand gloves mask for protection. All two components are stored in cool and dry place under the roof until fully prepared for instant application it original unopened sealed containers. Storage life epoxy resin 12 month at the temperature 300 deg c epoxy coal tar 12 month at the temperature 300 deg c