Weight 500 kg Pendulum Impact Tester, Surface Finishing Color Coated, Voltage 230 V

Pendulum impact tester unilab, 014som the pendulum impact tester is tailored for conduction izod & charpy test. The pendulum is affixed to anti friction bearings. It has two starting positions, The upper one for charpy and the lower one for izod testing. On release, The pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the peak of drop before rupture & height of raise after rapture of the test specimen and is read from the maximum pointer on the dial scale. Charpy test the charpy test piece rests on alloy steel supports anvils fitted at the foundation belonging to the device rigidly held in position by alien screws. End stopper is made available for quickly & accurately locating the test piece centrally between the supports. Izod test the izod test piece is clamped vertically in izod support anvils, Fitted on the base of the machine. The support is supplied with a machined vertical groove to match the test piece size. The front clamp piece & alien screw enable clamping of the test piece in correct height through the backing of of izod setting gauge supplied. Controls of pendulum the pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Specifications maximum capacity, 300 j / 168 j minimum scale graduation, 2 j overall size approx., 1. 65 m h, 1. 1 m x 0. 45 mx net weight approx. 37. 5 kg.