Potassium Silicate Mortar

Potassium silicate mortar finds extensive application in acid resistant bricks & tiles lining works as bedding & jointing mortar for tanks, Floor, Drain, Foundation etc. Resistant 1000 C max. Mortar preparation typically involves a mix of liquid and powder components to achieve optimal performance For the typical, Optimal results mixing proportion is 1 part by weight of solution to 3 parts by weight of powder, Though this may fluctuate slightly Based on the temperature and operational environment, Mix small quantities of mortar. Ensure the solution is well-stirred before application. Apply the mixture Place the powder into an appropriate mixing bowl and combine well using a spatula or trowel. This is the mixing process Continue mixing until you achieve a ensuring all, Consistent blend the mortar is utilized from the mixing container Prior to preparing the ensure the, Next batch cement plastered surface is adequately rough, Aligned, Leveled, And completely dry & spotless, Devoid of dust, Grime, Grease, Oil, Etc., Ensuring the necessary incline is preserved as adjustments to the slope are not possible or modified with a lining resistant to acid works. Setting/curing potassium silicate Mortar hardens autonomously as a result of the chemical reaction that takes place when the powder is combined with the resin The initial setting takes place within 6 to 8 hours at 30°C, While full curing is achieved in 24 to 48 hours concurrently temperature duration of one week at 30ocplease guarantee that all water remains contained within the boundaries of the brickwork until fully settled cured. Acid curing when the bedding & jointing mortar is different, After the bedding mortar is properly set, Cure the joints for a minimum period of 72 hours with 20 to 25% hcl acid before applying the resin type mortar. After wash the, Acid curing free acid in the joints with clean water & allow sufficient time for thorough drying. Resin mortar shall then be filled into the joints. Mechanical/physical operational hours set at 30 oc Minimum density measured over a period of 20 minutes cured mortar 2 grm per ccbond strength 5 kg. Cm2compressive strength 150 kg/cm2flexural strength 40 kg/cm2toluene absorption max. 18%storage life solution 24 a duration of months at 30°C and 2°C solution 24 Both components should be kept in dry environment, A cool for months at temperatures of 30°C and 2°C seal until you're prepared to brand new, Utilize it and unopened airtight storage units. Packaging option 75 kilograms in metric system drumpowder 50 kilograms packed in plastic bag.