Machine Type Automatic Roto Molding Machines, 000 Ltr, Voltage 420 volt

These machines enable molds to spin across due to, Various axes their construction onto arms that pivot on two intersecting axes. During the rotation, The molds are transitioned into a heated oven where the warmth liquefies the powders. The arms will keep rotating as the molds are taken out from the cooking unit intended for heating cooling. Bi, Axial This machine is crafted to cater to high-volume production, Allowing simultaneous manufacturing of multiple products within one cycle, Achieving outputs of around 500 and 3000 simultaneously in, Ltr cycle one unit, 2000 ltr, 1000 ltr. We With the ba2000, Ba5000, And ba10000 liter models, We produce water storage tanks ranging from 300 liters up to 10, 000 liters in capacity single station bi-axial machine with one arm option dual-axis rotational casting process machine. One straight, Armtypical Total duration ranges from 65 to 70 minutes, With 25-30 minutes for heating, 20 minutes for cooling, And 20 minutes for loading & unloading . Fully self-igniting burner, Compatible with diesel or LPG or natural gas. Fuel the usage pattern is approximately 3. 5 kg of LPG reliant on demand based on the model's capabilities selected. Connected the load begins at a minimum of 7. 5 h. P., Contingent upon model capacity selectedprocess heat reaches as high as 200 degree celcius. Available Available in 2000 ltr, 5000 ltr, And 10000 ltr, This single-arm bi-axial machine is designed for efficiency. Additionally, You can find a dual-arm bi-axial machine for enhanced rotational moulding capabilities machine. One angled arm & one straight, Armfully automatic burner, Diesel or lpg or natural gas. Fuel LPG usage typically revolves around 5 kg per cycle on model capacity selected. Connected The load begins at a minimum of 10 horsepower, Varying by model capacity selectedprocess temperature upto 200 degree celcius. Available Bi-axial machines available in 2000 ltr, 5000 ltr, And 10000 including a, Ltr models three-arm rotational moulding option machine. One offset arm & two straight, Armfully automatic burner, Diesel or lpg or natural gas. Fuel approximately 12 kg of LPG is required for the consumption cycle on model capacity selected. Connected The load initiates at a minimum of 30 horsepower, Varying by model capacity selectedprocess temperature upto 200 degree celcius. Minimum Ability to produce 100, 000 liters within a 24-hour timeframe on model capacity selectedapprox The dimensions associated with the equipment are length x width x height = 11 x Five by eight mtravailable Bi-axial machines available in capacities of 2000 liters, 5000 liters, And 10000 liters, Along with a four-arm bi-axial rotational moulding machine machine. One offset arm & three straight, Armsfully automatic burner, Diesel or lpg or natural gas. Fuel consumption cycle around 12 kg of lpg depend on model capacity selected. Connected The load initiates at a minimum of 40 horsepower, Varying by model capacity selectedprocess temperature upto 200 degree celcius. Maximum Capability to produce 200, 000 liters within 24 hours, Contingent on demand on model capacity selectedapprox The dimensions of the equipment are 17 inches in length, Width, And height 7. 5 by 13 inches mtravailable Four-arm options available in 2000 liters, 5000 liters, And 10000 liters bi, Axial machine.