Power Consumption 290W, Vibration Emission Value Ah 122mm Electric Sander, No Load Speed rpm 2500rpm, 7500-12000

Safety & warnings, Read all safety warnings and all instructions. Failure in order to track the warnings and instructions might cause electric shock, Fire and/or serious injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mainsoperated corded power tool or battery, Operated cordless power tool. Keep work area neat and well lit. Cluttered or dark areas invite accidents. ??? do not operate power tools in explosive atmospheres, Such similar to the presence of gases or, Flammable liquids dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Power tool plugs must match the outlet. Never modify the connect with any way. Do not use any adapter plugs with earthed grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock avoid body contact with earthed or such as, Grounded surfaces pipes, Radiators, Ranges and refrigerators. Exists an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain in damp environments water entering a power tool will increase the likelihood of electric shock. Do not abuse the cord. Never use the cord pulling or, For carrying unplugging the power tool. Keep cord Keep out of direct crisp contours, Heat oil and moving parts. Damaged or entangled cords increase the risk of electric shock when operating a power use an, Tool outdoors extension cord Designed for use in outdoor environments use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location use a, Is unavoidable residual current device rcd protected supply. Use of an rcd reduces the risk of electric shock. Stay alert, Watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence alcohol or, Of drugs medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, Non, Or hearing protection used, Skid safety, Hard hat shoes for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch exists inside the off, Position before connecting to power source and/or picking up, Battery pack or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part derived from the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep clothing and, Your hair gloves away from moving parts. Loose clothes, Jewellery or long hair can be caught in moving parts if devices are offered for the connection of dust extraction and ensure these, Collection facilities are connected and properly used. Use of dust collection can reduce dust, Related hazards. Do not force the power tool. Use the correct power tool Designed to suit your needs the correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.