Brand Zockethub Fire Alarm System, Open collector outputs 2 x Fire and 1 x Fault output available via optional FF574X expansion loom Max sink current 100mA
Key Highlights
Available Variants
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Fully Automatic |
| Brand | Zockethub |
| Notes | One FF596T repeater transmitter PCB allows the connection of up to eight monitored MFP Repeaters (st |
| Weight | 5.0kg. |
| Controls | External (key operated) Reset/Test Scroll; Silence Alarm/Fault Sounders; Evacuate; Disable. Interna |
| IP Rating | IP30. |
| Indicators | Mains On; Gen Fire; Zone Fire; Zone Fault (S/C,O/C,head out,Zone disabled); Sndr Fault; Processor |
| Mains supply | 230V 50/60Hz. |
| Compatibility | Designed to comply with the requirements of BS5839-4 (with head-out monitoring as standard). |
| Auxiliary inputs | Class change input available via optional FF574X expansion loom. |
| Auxiliary relays | 1 x onboard relay (1A,30 VDC,follows sounders). |
| Quiescent Current | 60mA (with no mains supply,fault beeper muted,no aux. output connections,EOL devices and resistor |
| System Components | Fire Alarm Control Panel |
| Eol Resistor Value | 6800 ohm 5 percent Tol. 0/25W (blue,grey,red,gold). |
| Product dimensions | 405 W * 267 H * D 92mm. |
| Construction finish | Metal lid and base. |
| Mains rated current | 330mA max. |
| Internal power supply | 27V nominal. |
| Open collector outputs | 2 x Fire and 1 x Fault output available via optional FF574X expansion loom. Max. sink current 100mA. |
| Call Point Resistor Value | 470 to 680 ohm. |
| Max battery size and type | 2 x 12V 3.2Ah VRLA connected in series. |
| Maximum sounder output current | 1.4mA (to all outputs). Outputs are fused at 1A. |
| Total output current limited to | 1.4A,230V. |
| Number of detector zone circuits | 8 (Max. length per circuit is 500m). Can be extended to 12 zones using an FF501Z 4 Zone extender PCB |
| Maximum devices per detector zone | 20 detectors (max. detector current 2mA). No limit for manual call points. |
| Number of conventional sounder circuits | 4 (Max. length per circuit is 500m). |