Power 1 HP 4 Inch Submersible Pump, Number Of Stages Multi Stage Pump, Discharge Range 30-60 LPM

Applications, Pumping water from bore well. Mine dewatering. Circulating water. Surface water pumps raise buildings. Used single and, In apartments two store buildings and used for lifting water from greater depths. Pump, He impellers are of noryl dynamically balanced individually and also after assembly on the shaft. Special lead, Tin bronze metal and high nitrile rubber bearing bushes function as Exceptional durability against wear and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A One-way valve is provided to prevent back, Flow of water. Motor, The motor is squirrel cage totally enclosed, Induction motor and filled with water. Body is crafted from heavy duty stainless steel to prevent rust formation. High quality water resistant polymer insulated wires are used for longer life. High tensile steel rotor shaft with copper rotor with good quality laminations, Epoxy coated and baked for rust prevention. Thrust bearings are of special design the bush bearings are lead, Tin for high wear resistance. The winding and bearings are lubricated by pure water, Filled in the motor before installation. The motor is protected from sand and, Well water foreign materials. Features, Ngenious hydraulic design predicts higher efficiencies over a broad spectrum of heads and discharges, Varying between 60% and 140% of duty points. This indicates high energy savings even at a wide variation of water level in the bores. In an extreme the temprature, Voltage fluctuation of the wind is kept at minimum inorder to raise aided by the guidance of of cooling mechanism.