Frequency Hz 50 Hz, Voltage 440 V Air Cooled Industrial Chillers, Automation Grade Automatic, UsageApplication Oil Cooling

An industrial air, Cooled chiller is a refrigeration system that cools fluids and works together with a facility s air handler system. A chiller has four main parts an evaporator, Compressor, Condenser, And expansion valve. 1. An air, Cooled chiller works by absorbing the heat from processed water. Once the liquid contained in the air handler system it becomes, Is used warm and is sent back to the chiller. Heat is transferred distant from the water using the chiller s evaporator2. Liquid refrigerant evaporates while in motion over the evaporator tube, Creating a low, Pressure the evaporated, Gas. Next refrigerant travels to the compressor where the low, Pressure gas is compressed into a high, Pressure gas. The gas then leaves and goes to the air, Cooled condensers. 3. While in heat is, The condenser extracted from the chiller by being blown outside through fans on the next to the condenser. Because the heat is blown beyond it is, The chiller ideal to place the chiller outdoors or within a large indoor location that will not be affected by the excess heat4. After the gas leaves the refrigerant, The condenser changes into a high, Pressure liquid. The high, Pressure liquid travels to the evaporator through the expansion valve. During the refrigerant, This process changes from a high, Pressure liquid to a low, Pressure liquid. Because an industrial chiller works on a this low, Pressure liquid, Continuous cycle is then transferred back to the evaporator where the whole cycle will repeat itself5. Industrial chillers frequently utilized in large buildings such as hotels, Indoor malls, Hospitals, And large industrial buildings, Alongside locations that may have multiple buildings that require cooling such as outdoor malls and theme parks. Portable air, Cooled chillers can also can serve as large events or emergency situations.