Aluminum Heat Sink Case with Double Fans for Raspberry Pi 4B, UsageApplication Offline Ups, Color Silver

Presenting a must, Have accessory to experience exceptional efficiency of the Raspberry Pi computer 4 models. The aluminium alloy case with double dual cooling fan heat sink metal case is designed especially Compatible with the Pi 4 Single-Board Computer model b. This is top-tier craftsmanship heat sink for industrial and continuous use applications for the raspberry pi 4. This heat sink enables the raspberry pi to function with very high reliability and at higher efficiencies for applications which require the maximum computing strength of the pi 4. How to assemble assembly of your heatsink should be quick and easy. First make sure, And foremost your raspberry pi 4 is powered off and take a, Unplugged. Next thermal thermal pad, Peel off the protective covers and attach to the cpu of your raspberry pi. If you you can, Would like attach thermal pads to the ddr4 ram chip, However, It’s not a necessity. Finally, It is necessary to have to position the top half belonging to the case with the correct orientation, While simultaneously positioning the bottom half underneath your pi. Grab your hex screws and trusty hex key, Secure your new pi heatsink case in place. If after assembly a presence of visible gap between the cpu and the heatsink, Disassemble and use an additional thermal pad. Connect the fan wire as shown below the orientation of red & black will control which direction the fan blows. There is a possibility for them to be reversed . Features type raspberry 4b aluminum alloy metal case material black aluminum alloy metal compatible Compatible with Raspberry Pi devices 4 easy to install, Ultra, Thin design. Open case design with daul fans for Rapid thermal dispersion Every port and slot on the case is compatible with the Raspberry Pi 4 model b perfectly Combining strength with a featherlight design long, Lasting stainless size 87mm 56mm 25mm