Model Number 6104 Bipolar Flat Pin Cable, Appearance Modern, Material PVC

Description Failure to follow these usage and safety guidelines can result or other, Equipment failures, In injuries unforeseen events, All cables have to undergo thorough cleaning and sanitization sterilised prior to first use and every other use., The cables must be submitted to a visual inspection and a functional test prior to every application, Guarantee that the correct connector both on the generator side and the instrument side has been chosen and that the connector has been fully inserted. refrain from using damaged cables., Do not kink to avoid cable break., To grasp plug, Avoid damages to remove cable, Do not pull cord. Avoid operating the instruments near any flammable or explosive materials substances. Reprocessing because of the the materials, Product design used and the intended purpose, It does not exist possible to define a limit with regard at the highest level possible number of reprocessing cycles. The serviceable span of the instruments is determined by their function along with by a careful handling. Preparation and transport remove coarse dirt from the cables immediately after each use. Avoid application fixation agents or hot water >40 c . Machine reprocessing cleaning place the instruments in a basket on the insert module or situated on the inserts of the mic module and start the cleaning process. 1. Prerinse. With cold water for 1 min 2. Discharge 3. Prerinse with cold water for 3 min. 4. Discharge 5. Wash at 55 c with a 0. 5% alkaline or at 45 c with an enzymatic cleaning agent for 5 min. 6. Discharge 7. Neutralise with warm tap water >40 c and a neutralising agent for 3 min. 8. Discharge 9. Rinse with warm tap water >40 c for 2 min