Features High Strength Blister Foil, Grammage 240 gsm

We fabricate a selection of goods of hard aluminium foil ideal for blister packing comprising healthcare solutions such as tablet, Capsules, Etc., Comprising the following standard specifications the final product specifications are produced grounded in the mutually accepted terms contact with the customers. Standard foil gauge options tolerance, /, 8% 0. 020 mm, /, 0. 0016mm Measuring 0. 025 mm with a precision tolerance of 0. 002 mm Measures 0. 030 mm with an accuracy of 0. 0024 mm heat seal coating colourless vinyl resin option for tinted resin available in accordance with the necessary state regulations concerning direct engagement with medical products and drugs. The resin works well for heat sealing to pvc/pvdc coated pvc films. Coating thickness options a 4, 6 gsm with a tolerance of, /, 0. 5 gsm b 6, 8 gsm with a tolerance of, /, 0. 5 gsm standard, Heat sealing if not, Coating gsm specified is 4 with a tolerance of, /, 0. 5. Seal strength with pvc/pvdc 8 n/25 mm min. Printing and lacquer coating printed as layout and, Per text shade approved by customer. Clear lacquer, For non, Printed specification to be coated as a protective coating and good printability. Printing inks and lacquer coatings have the ability to withstand 180 deg. Single c item sec. Dwell time. Configuration printed and unprinted blister seals are provided in the reel forms. Unprinted blister foils are also available as jumbo roll. Winding direction generally printed or clear lacquer side is out equipped with a thermal seal coating inside. Fundamental material choices a plastic b aluminium Cardboard in a C configuration core id 76 mm in length and 0. 5 mm in width the length of the core is equal to the width of the web. Splices butt type made with 25 mm pressure sensitive tape. Reel outer diameter 250, /, 10 mm for Four hundred, Slit material, Ten mm for jumbos reel wander within, /, 1 mm reel/web width plain 45mm to 800 mm with a tolerance of, /, 0. 5 mm. Printed 45mm to 600 mm with a tolerance of, /, 0. 5 mm joints reel limit maximum 2. Average less than 1. Pin holes 0. 025 and 0. 03 mm foils are lacking a pin holes. In 0. 02 mm foil, 40% of foil lacks pin holes, Rest less than 10 psm