Cement Injection Service, Service Location Hyderabad

Injection process fully examine the existing site conditions to make certain that all associated work can be performed without removing or relocating structures or, Existing utilities structural members. 1 remove all standing water. 2 drill at a 45 degree angle where possible to intersect the wall/floor joint interface halfway through the thickness pertaining to the foundational layer e. G. 4 deep for 8 thick slab 3 drilling depth should be half the thickness from the cement mix member. 4 install mechanical injection ports and secure in place at a spacing of 6, 12 inches apart 6 for hairline and 12 for wider cracks . Alternate positioning from left side to right side as you move along the crack where possible. Extremely wide cracks if any exist must be protected with a surface seal prior to injection to achieve contain the injection resin until cured. Under proper pumping