Power Range 07 to 3 HP37kW-22kW, Specific Gravity 1004 max CRI Electric Motor Pump 2-18, Method of starting CSCR, Power Source 3 phase
Key Highlights
Available Variants
Technical Specifications
| Parameter | Value |
|---|---|
| Type | Horizontal |
| Brand | CRI |
| Shaft | SS- 410 |
| Speed | 2880 RPM |
| Casing | Cast Iron / S.S 304 / (DIN 1.4509) |
| Hardness | 300 ppm (max.) |
| Impeller | Cast Iron / Noryl / Delrin / S.S 304 |
| Versions | Single Angstrom phase 200-240V,50Hz,AC supply. CSCR,Three-phase 380-450 V,50V,AC supply. |
| pH Value | 6.5 to 8.5 |
| Diaphragm | High Nitrile Rubber |
| Turbidity | 50-ppm silica scale (max.) |
| Viscosity | 1.75 x 10^6 Angstrom m^2/sec (max.) |
| Pump Shaft | S.S 304 / S.S 410 |
| Shaft Seal | Nitrile butyl Rubber |
| Check Valve | Delrin |
| Motor Phase | Three Phase |
| Outer Shell | Mild Steel/ S.S |
| Power Range | 0.7 to 3 HP(.37kW-2.2kW) |
| Power Source | 3 phase |
| Type of Duty | S1(Continous) |
| Locking Strip | Mild Steel / S.S |
| Upper Housing | Cast Iron |
| Allowable Solid | 3000 ppm (max.) |
| Thrust Assembly | Leaded Bronze & Compostos / S.S 420 Vs Graphite Carbon |
| Check Valve Seat | Nitrile butyl rubber |
| Diffuser Chamber | Noryl |
| Journal Bearings | LTB4 |
| Motor Horsepower | 1 - 3 HP |
| Specific Gravity | 1.004 (max.) |
| Maximum Flow Rate | 10 lps(36 m^3(angstrom)/hr) |
| Sand Guard Rubber | Nitrile Rubber |
| Maximum Total Head | Upto 108 Metre |
| Method of starting | CSCR |
| Stop Angstrom Ring | S.S 304 / Hylem |
| Nominal Outlet Size | 25,32,40,50 & 65 mm |
| Chlorine Ion Density | 500 ppm (max.) |
| Degree Of Protection | IP 58 |
| Direction Of Rotation | Counterclockwise from driving End(Vertical OWS),Clockwise from driving end( Horizontal OWS) |
| Suction Inter Connector | Cast Iron |
| Maximum Liquid Temperature | 33 Angstrom Degree Celsius (max.) |
| Permissiable Amount of Sand | 50 gm/m(Angstrom)^3 (max.) |
| Check Angstrom Valve Angstrom Housing | Cast Iron |
| Intermediate Angstrom Bearing Angstrom | S.S 304 / NBR |