DIN Abrasion Tester, Brand Caltech Engineering

Technical engineering offerings by Caltech offers din abrasion tester abraser / abrader conform to the astm d5963 and is0 4649 standards. Din abrasion tester will allow you to evaluate the abrasion resistance of rubbers vulcanized thermo set rubbers and thermoplastic elastomers that are subject to abrasive/frictional wear and shoe soles, Such as tires, Conveyor in their, Drive belts actual service. Since wear remains a constant result of abrasion, Different test methods have been developed for the simulation of long term weardin abrasion tester has demonstrated to serve as the highest performing method of simulating long term wear. This method enables comparative tests for the management of the uniformity of a specific material. The achieved test results provide important parameters in respect to the wear of elastomers in practical use. The abrasion resistance is measured by moving a sample item across the top layer of an abrasive sheet mounted to a revolving drum, And is expressed as volume loss in cubic millimeters or abrasion resistance index in percent. For a smaller, Volume loss number indicates better while for, Abrasion resistance the abrasion a smaller, Resistance index number denotes poorer abrasion resistance. The din abrasion This device functions as additionally suitable for comparative measurements on other resources such as plastics, Chalk or painted surfaces. It confirms to din, 53516, Jis, K6369, Gb/t 20991 and iso4649 standards