Dr Fixit Newcoat, Nature Single Component Liquid, Tensile Strength Min 100 Nmm2, Elongation Min 100

Dr. Fixit Revitalizing Coat is notably weighty duty terrace waterproof composed of, Coating system specially developed highly elastic & resilient acrylic appropriately selected polymers & graded fillers, Lightfast & weather durable pigments, Micro, Fibers, Additives & best quality fungicidal in the water medium. Serves the purpose of a liquid applied waterproofing membrane for all categories of building terraces. Dr. Fixit new coat is a three, Layer system with coats Available in a variety of hues ensuring the proper build, Up of the thickness, Transforming it into a reliable waterproofing system. The coating performance can be enhanced for large roofs, By offering a fiber mesh that is embedded or sandwiched between the coats. Areas suitable for the creation of flat roofs and terraces sloping. Over prevalent waterproofing methods utilizing cementitious materials like brickbat coba, Polymer coatings, Concrete finishes etc. Advantages and key attributes film thickness provides higher thickness of the dry film of 1 to 1. 25 mm in three coat applicationcrack bridging, Seals fractures measuring A maximum of 2 inches mm widthapplication perk, Eliminating the need to take out existing sound brickbat mortar, Cement, Plastering material surfacesuitability, Can suitable for both level and inclined surfaces roofsstrength, Higher ability to withstand tensile forces and tears resistance & bond strength with cementitious substratesresilience forms highly elastic & tough protective layer so helps to resist the framework movementsdurability resistant to UV rays and atmospheric elements conditionsabrasion, Resistant no additional protective coating is required for roof exposed to foot pressure trafficease of application is suitable for use by brush & roller easilyweight addition minimal in mass does not add extra weight over the rooftoxicity This product contains no toxic ingredients in naturebreathability it is breathableeasy to recoat existing surfaces coated earlier incorporating Dr. Fixit new coatmethod of application surface Thoroughly ready the surface by scrubbing, Washing, And clearing away any dust, Dirt, Oil, And grease loose particles. In pre-existing vintage terraces with brickbat coba Before applying screeds, The substrate should be evaluated for soundness, And any damaged spots, Voids, Or jagged edges must be addressed and removed till the mother slab. The slab should be recoated with the slurry developed by Dr. Fixit pidicrete urp and cement in 1 1 proportion. The brickbat, After drying coba in that portion should be reinstated by mixing dr. Fixit pidicrete urp in the base slurry as well as while doing the top coba. In where the, Other areas coba is sound, The All surface imperfections must be addressed with dr. Fixit. Polymer-enhanced mortar or crack-x formulation case cracks is wider than 5 mm. Cracks less than 2 mm, Should be cleaned free of dust with a vacuum cleaner. Apply Dr. Fixit Primeseal Sealant in the crack and let it dry. Then pour dr. Fixit new coat into these cracks and wait for it to dry. Ensure that portion belonging to the roof slope of no less than 1 inch 100, Is already provided. Bitumen moisture-proofing solutions is required, If existing to be fully extracted using mechanical scarification or various alternatives efficient technique mechanical means. Application dilute 2 parts of dr. Fixit primeseal with 1 one part of water. This dilution will cover 7 to 8 sq. Mt. Let it sit until dry for 6 to 8 hrs. Apply the primary coat of dr fixit new coat without any dilution at a pace of 2 m 2 use per liter and wait for it to dry before starting the next layer and third coats, The level of application is the same.