Input Power 12kVA Dry Battery Testing Machine, Constant Current Setting Range 01500mA, Isolation Voltage 1000V CH-TO-CH 2000V CH 2000V CH2000V CH-TO-GND

A 3000 channel data acquisition system das has been designed for testing the progression of life stages of dry batteries. This unique project was done for eveready india ltd. This project was conducted within a view to study the potential for the dry zinc chloride batteries under simulated conditions of their actual pattern in different applications. This particular das has a 32-bit architecture micro, Controller with a baud rate of 19200. The data s are sent to a pc based controller via control area network can bus. The can bus has an advantage of transmitting datas over a longer distance approx. 2 km . The can bus is a two wire system, Thus eliminating the cumbersome usage of a larger number of cables. Here, Not only the life cycle tests are carried but also the initial constituents of the batteries are entered in conjunction with their manufacturing dates. The batch details of the batteries are also entered into the data base. The initial open circuit electrical voltage and short circuit current are noted and fed into the system. After entering these values, The life cycle tests are started. The evaluations consist of founded on, Various types the requirements. Here the batteries are tested over a varied period ranging from a few days to a couple of years. The data s are recorded in a discharge card and stored for future reference. Technical specificationtesting of 192 batteries in just one station 24v dc supply to the entire station micro controller based add, On unit for single modules data transmission through controller area network can bus baud rate of 19200 with 20 samples per second data might be represented as transmitted over a selection of 2 km