GPS Based Master Slave Clocks, Power Supply Electric, Frequency 50 Hz

In controller and dependent clocks set up it will comprise a master clock & several secondary clocks in remote locations. These secondary clocks appear to work like an ordinary plug, In electric clock & work on their own circuits. ????these clocks differ from the which are, Impulse type electrically advanced each minute by the central clock unit impulse type clocks are usually called slave clocks since they cannot function at all without the chief clock. You will find a pair basic variations in master and slave clock systems, Wired and electronic . In a the secondary, Wired system clocks are hard, Wired to the authority clock with their own network of wiring. This dedicated wiring consists of 3 wires & requires that all secondary clocks be connected to this network for the purpose of receive corrections designed by the specialist clock. These systems are usually 110 volts but some are 24 volts. The master clock energizes the third wire to apply voltage to the correction solenoids in the secondary clocks. But in a master equipped with GPS technology and slave clock set up, The master clock will receive the satellite's time transmissions and the time is about to be indicated in the master clock. Slave Timepieces are set to be connected to these master clocks either through serial port communication or through wireless transmitters or through ethernet port communication. In in the instance of gps based master and slave clock set up the coordinated clocks will be linked to the central clock system through serial port communication by signals cables from the mater clock. In the case of wireless synchronized master and slave clocks set up the master alongside the slave clock will receive the clock signals originating from the satellite through transmitter unit which will keep transmitting the temporal signals coming from the satellite at frequent intervals. All the clocks connected to these set up will have built, In receiver units to receive the time signals from the transmitter units. ??