Physical State Powder, Chemical Formula Na5P3O10 Naphtha Additives, for Domestic, CAS Number 7758-29-4, Grade Standard Reagent Grade

Naphtha additive, Sc74 naptha & c9 fuel additiveimproves flash point by atleast Ranging from 6 to 8 nos. Sc74 operates as an enhancer that raises the molecular weight of naptha and C9 fuels, Aimed at decreasing volatility therefore lowers the probability of vapor lock. Sc 74 also has oxygenated hydrocarbon & nitrates to boost the combustion quality considerably with reduction in soot & co in exhaust by @ 20% which indicates improved combustions. It increases the lubrication property of c9 fuel/naptha. Properties of sc74 additives density @ 0. 91 kg/litcolor opaque dark greenproportion designed for application 1 3000 in napth / c9 fuelsflash point @ 350cviscosity @ 20 seconds in b4 25 ltrs cuppackaging available, Cans only 1 ltr, 5 ltrs, 10 ltrs. Note few adjustments in system are required after administration of the additive throughout the network they are tailored to function as made by consultation with us. Sc74 naphtha additive operating instructions this additive adds hydrocarbon molecules to the naphtha designed to boost the octane number of naphtha and acts combustion catalyst. For additive to naphtha Proportion of one 3000 proportionthe air inlet of boiler is meant to be adjusted such that the smoke level is reestablished to original permissible level. Monitor stac temperature & log its variations and report us identical for our evaluationif stac temperature increase reduce the velocity of fluid movement to preserve the original stac temperatureit may increase initially because because of elevated carbon deposits on boiler tubes. Run that boiler with increased stac temp till the deposits i. E. Scales on boiler tubes are disintegrated, Then stac temperature may be established with lower stac rending indicating better heat transfer rateif stac temperature is not reduced even after one weak reduce the flow rate of naphtha by reducing inlet naphtha pressure step by step till original stac temperature is established i. E. Stac temperature level of without additive level