Compressive Strength 26 Nmm2 Nitofloor Hardtop Standard, Density Approximately 2320 kgm3, Color Gray

Non metallic, Monolithic surface hardeningcompound for fresh concrete fl oorusesnitofl or hardtop standard provide a highly abrasion resistantsurface to Sturdy cement flooring by the dry shake, On method whichensures that the hardwearing surface bonds monolithicallyto the base concrete. They are optimally tailored for all industrialareas subject to the heaviest traffi c, E. G. Loading bays, Truckinglanes, Car parks, Workshops, Ramps andspillways, Machine shops. Advantages, Supplied prepared for immediate use, No additive required non metallic, Does not rust or stain. Provides a hard, Abrasion resistant surface forms monolithic bond with base concrete easy and economical to apply. Application of Nitoflor Hardtop Classic can begin when thebase concrete has stiff ened to the point when light foot traffi cleaves an imprint of about 3mm, 7mm any bleed water shouldby now have evaporated but a wet sheen can still be clearlyseen on the concrete surface. Note 3mm to 7mm imprint is only a guide and actual imprintto be established by doing a mock, Up at site. Nitofl or hardtop standard are applied in two stages. A the fi rst application is crafted from 50% to 70% of the totalmaterial. Nitofl or hardtop standard is evenly broadcast ontothe concrete surface. When the material becomes uniformlydark by the absorption of moisture from the concrete this fi rstapplication can be fl oated. Wooden fl oats or, Thepower trowel with disc, On large areas may be used. It holds significant value, However, That the surface is not over worked. B immediately after the remaining, Fl oating nitofl or hardtopstandard is sprinkled evenly over the surface. Again moistureis absorbed as well as the top layer can be fl oated in the same wayas before. Final fi nishing of the fl oor using a power trowel can be carriedout when the fl oor has stiff ened suffi ciently so that damagewill not be caused. Repeated power trowelling would furtherimprove the abrasion resistance.