Surface of Application UPVC, CPVC Pipe Fittings, Temperature Celsius 6 to 68 Degree C PVC PVC Solvent Cement, Brand Solvo Bond

Solvobond pvc 501 is regular bodied pvc solvent cement for pvc pipes & fittings upto 6 diameter. It is well-suited for conduit & low, Pressure and drainage systems. Applications regular bodied pvc solvent cement low voc low viscous, High coverage sustain high pressureusage pvc pipes and fitting for low pressure and drainage. Assembly recommended at temperature above 5 c. Allowable gap 0. 3 mm. Interference 0. 2 mmborewell fittingsjoining electrical conduits how to use cut the pipe roughen and, Remove burr clean the exterior layer of the pipe and inner exterior of the socket check the dry fit of pipe & fitting. It should go up to termination of the fitting easily. Apply one coat of solvobond pvc 501 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket. Again apply second coat on pipe. Twist the pipe 45, 90 while inserting into the socket for better spreading of solvobond pvc 501 and hold for 30 sec. Do not move joint for 10 minutes partially emptied container should be close immediately. No pressure test for 24 hrs on < 63 mm pipe 48 hrs on 75, 160 mm pipestorage Store the item in a dry location within its original, Intact packaging closed containers at temperature between 2, 40 c. Partially emptied container should be closed immediately. Handling precautions mandatory and recommended industrial hygiene procedures should be followed whenever the goods we provide include being handled and processed. For additional information we recommend checking with the corresponding product data sheets and the brochure hygienic precautions for handling plastics products.