Brand EDWARD, Material Plastic SIGA-SB BASE, Automation Grade Manual, UsageApplication Office Buildings

Description the siga, Sb is the standard base for signature series detectors. It connects the detector to the communication line pathway slc, And provides wiring terminals for connection to a siga, Led. To install the siga, Sb 1. Mount the siga, Sb on a compatible electrical box using the screws provided with the electrical box. 2. Wire the base depicted in the image the wiring section. 3. Write the address designated for the detector on the label provided and apply the label to the inside rim of the base. 4. Use a siga, Ts trim skirt to finish the installation as needed. To wire the siga, Sb 1. Break the wire run at each terminal. Do not loop the signaling line circuit field wires around the terminals. 2. Insulate the shield with electrical tap