Brand IMPERIAL, Packaging Type HDPE Bag Sulphur Mortar, Material Powder, Type REFRACTORY

Resistant sulphur mortar is resistant non, Oxidizing acids, Dilute oxidizing acids and netural salts. Resistant to temperature 90 c max. Preparation of mortar the mortar should be heated at low tempreture in a suitable kettle by stirring with metal rod or ladle. The exterior will be laid first with membrane. Over the dry coat of membrane, The chemical resistant bricks or tiles be placed on spacer chips. Melted sulphomor mortar shall bepoured through joints of bricks or tiles. If there happens to be vertical surface joints of bricks or tiles are inclusive of applying with adhesive paper. Sulphomor mortar is poured between the wall surface and the tile or bricks. Please make certain that no liquid escapes the brick edges of the project until it has completely set cured. Surface preparation the cement plastered surface shall be slightly rough in line & level, Free from, Dry clean dust, Dirt, Grease, Oil etc., Maintaining required slope offers customizable settings or equipped with a protective acid-resistant lining works. Mechanical/physical property density of cured mortar 2. 10grm/cc to 2. 20grm/ccbond strength 10 kg. /cm2compressive strength 280 kg/cm2flexural strength 70 kg/cm2water 1% absorption with a shelf life of durability 12 months at the temperature 270c, 20c packing ingot, 50 kg. Bag, Powder, 50kg. Bag. Note if sulphomor is over heated or ignited a tight cover or wet gunny bags shall be kept ready suitable for deployment in case of fire. Sulphomor mortar burns equipped with a reduced blue flame. If this should happen, Heating should be stopped and the vessel should be layered with lid or wet gunny bags. If the mortar thickness or over heating, It ought to be allowed to cool and stir till it become thin. Consideration is necessary taken that water or damp mortar should not fall in the heating vessel to achieve the goal of avoid foaming.