Accuracy 01 kg, 05, Material Steel Thayer Weigh Belt Feeders, Power 150-200 W, Product Type industrial

Initially crafted for steel mill service, Thayer s weigh belt model mdh benefits put it into a class by itself. The model mdh offers an extremely robust design with an intense devotion to high-quality craftsmanship and attention to detail. With over 50 years of weigh belt experience thayer produces a weigh belt that is rugged and, Highly accurate dependable. Thayer feeders designed to endure the rigors of high capacity feeding and heavy density material ranging in particles sizes from fines to 6 lumps. The bottom line through the application of a thayer model mdh in the process translates into reduced lower overall, Operating downtime cost and quick return on the investment. Speed sensor mounted at idling tail pulleymeasures the true velocity of the belt via rotation of the not an, Idling pulley inferred belt speed based on motor speed. Belt slippage or breakage is immediately detected because the idling pulley stops rotating. Scale outside material handling areaan idler supporting the belt the weigh idler transmits the load to the scale, Which is located outside the weigh belt enclosure. This design has several benefits. The scale is not prone is away, To damage from the way for cleaning, And is not subject to tare build, Up since material cannot fall onto the scale. Automatic calibrationthayer scale s optional automatic test weight mechanism provides a means for applying a precision test weight to allow completely automatic calibration. The calibration sequence can be initiated via the weigh belt instrument keypad or using a contact closure. The demand for test chains is eliminated. High accuracy, Rugged measurement system100% of the scale s capacity is intended for weigh material. Dead weight of the weigh idler and belt is mass, Counterbalanced, Thus providing excellent resolution and a high signal to noise ratio. Thayer scale s rugged load cell design assures reliable and accurate performance for the duration of the weigh feeder. Screw adjustable idler alignmentthe idlers adjacent to the weigh idler are mounted on jacks for easy alignment on site. All idlers are mounted on individual cema brackets, Permitting removal to either side without major framework dis, Assembly or belt removal. Full length adjustable skirt boardstapered and flared from the inlet to the discharge to prevent pinching of material between the skirt and the belt. Skirt boards are located inside the belt flanges to provide two barriers to contain material and prevent spillage. For more details refer to the attached pdf file.