Size 14 Inch, 2 Inch Vicitaulic 18 Inch Plain End, Finish Polished, UsageApplication Hydraulic Hose Pipe Fitting

Style 99 roust, A, Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and including schedule, Beveled end 80 steel pipe and victaulic plain end fittings. Roust, A, Bout couplings are not designed for pipe with brittle linings, Cast or ductile iron, Use on plastic pipe pipe nor any pipe with a surface hardness greater than 150 brinell. Pipe is secured together by which are, Heavy jaws integrated into the housing. All sizes are supplied with painted housings and plated nuts and bolts. Galvanized housings are available. Features grips to provide a strong component for joining plain and beveled end pipe and fittingsnot designed intended for application with plastic pipehousing Ductile iron that meets ASTM standards a, 536, Grade 65, 45, 12. Ductile Available upon special request, Iron conforming to ASTM A395, Grade 65, 45, 15 is offered coating orange enamel. Optional hot-dip coated with zinc and others. Jaws carbon steel, Case hardened, Electroplated, Except sizes 1, 76. 1 mm and 139. 7 mm, Which utilize stainless steel, Type 416, Hardened. Gaskets select desired grade of choice e epdm EPDM identified by a green with a, Color code temperature tolerance of 30 degrees f ranging to, 230 f/ Recommended for use with cold and hot water services within the temperature limits of 34°C to 110°C, Plus various other applications designed for applications involving diluted acids, Oil, And multiple, Ambient air options for chemical solutions; UL listed aligned with ANSI/NSF 61 for conditions up to 86°F and 30 psi Recommended for potable water use up to 180°F (82°C); avoid for petroleum servicesgrade t nitrile Orange-coded nitrile material. Effective temperature range of 20°F to 180°F / -6°C to 82°C, 82 c. Recommended intended for fuels and oils air with Designed to handle alongside vegetable, Oil vapors and mineral oils, Within the defined temperature range. Avoid use for hot water services above 150°F (66°C) ideal for environments dry air, With scorching over 140°F f/, 60 c. The services mentioned fall under the umbrella of general service recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest victaulic gasket selection guide 05. 01 for specific gasket service recommendations and for a listing of services which are not recommended. Bolts/nuts/washers heat, Treated plated trackhead meeting, Carbon steel the physical and chemical requirements of astm a, 449 and physical requirements of astm a, 183. The 6 /150 mm and greater dimensions are supplied with hardened steel washers meeting astm f, 436 type 1 hot dipped galvanized steel